Choosing equipment

How much does a draft beer kegerator cost? Price guide for 2 – 8 keg units

A complete KRS kegerator (cabinet, tower, CO₂, regulator, manifold and lines) runs from about VND 25 million for 2 kegs to about VND 50 million for 8 kegs, before faucets and kegs. Full price table and how to choose.

· 5 min read

Quick answer: KRS kegerator cabinets cost VND 16 million (2 kegs), 20 million (4 kegs), 24 million (6 kegs) and 28 million (8 kegs). With tower, CO₂ cylinder, regulator, gas manifold and beer/gas lines the total is about VND 24.9 – 49.6 million, before faucets (chosen by type) and kegs.

Complete kegerator price table

ConfigurationCabinet (VND m)Tower (VND m)CO₂, regulator, manifold, lines (VND m)Total before faucets (VND m)
2 keg · 2 vòi163,75,224,9
4 keg · 4 vòi2086,334,3
6 keg · 6 vòi24107,041,0
8 keg · 8 vòi28147,649,6

The CO₂ side is a VND 1.8 m cylinder, a VND 1.8 m regulator, a manifold sized to the keg count (2-way 1.5 m · 4-way 2.4 m · 6-way 3 m · 8-way 3.5 m), 0.7 m of beer line per tap and 0.8 m of gas line per keg. The 2-keg cabinet takes a 2- or 3-tap tower (VND 3.7 or 5.4 m); the 4-keg cabinet a T- or U-shaped 4-tap tower (VND 8 m).

Build your kegerator and see every line item →

What is not included

  • Faucets: chosen by type (304 stainless, flow-control, nitro for stouts), priced per tap.
  • Kegs: 19 L stainless Corny keg VND 2.1 m each, Sankey S-type commercial keg VND 2.65 m each — many bars use their beer supplier's kegs.
  • CO₂ refills, and S- or A-type keg couplers to match your kegs, VND 650,000 each.

How many kegs do you need?

Size it by how many beers you pour at once, not by volume: each tap is one beer, fed by one keg. Homes and offices usually take 2 kegs, small bars 4, brewpubs and craft-beer restaurants 6 – 8. Higher volume means swapping kegs more often or using 30 – 50 L kegs, not more taps.

How much is a 4-tap draft beer cabinet?

A complete KRS 4-keg, 4-tap cabinet is about VND 34.3 million before faucets: cabinet 20 m, T- or U-shaped 4-tap tower 8 m, and about 6.3 m for the CO₂ side (cylinder, regulator, 4-way manifold, lines).

What is the cheapest 2-keg kegerator?

About VND 24.9 million for a 2-keg, 2-tap cabinet with tower, CO₂ cylinder, regulator, manifold and lines, plus two faucets of your choice.

How long does a CO₂ cylinder last?

It depends on how much you pour and whether you carbonate in the keg; dispensing only pushes beer and holds carbonation, so one cylinder covers many kegs. Leaky fittings are the most common cause of lost CO₂ — leak-test when installing.

Can you build a kegerator to fit my bar?

Yes. Besides the 2 – 8 keg cabinets, KRS builds stainless keg counters for 4 – 12 kegs to fit your floor plan. Send dimensions and tap count for a quote.

Request a kegerator or counter quote →

Gear & ingredients in this post

← All posts